Glossary of Terms
- A #revDefine("station") for which seismic data is available. Not all stations will
have data for a particular #revDefine("earthquake"). Also, stations may become physically
damaged and data is rendered unavailable.
- The time at which a seismic
wave arrives at a #revDefine("seismometer"). The image to the right shows a
#revDefine("seismogram") with the #revDefine("P wave") and #revDefine("S wave") arrival times marked. According to
this example, the P wave arrived at the recording device shortly after 11:43 AM and the S wave arrived shortly
before 11:45 AM.
- A section formed by a plane cutting through the Earth, at right angles to an axis. This allows
one to see the interior composition of the Earth. Examples of cross section illustrations can be seen
in the #revDefine("distance"), #revDefine("focus"), and #revDefine("lithosphere") definitions in this glossary.
- #revDefine("Earthquakes") can occur anywhere between the Earth's surface and about 700
kilometers below the surface. For scientific purposes, this earthquake depth range of 0
- 700 km is divided into three zones: shallow, intermediate, and deep. Shallow
earthquakes are between 0 and 70 km deep; intermediate earthquakes, 70 - 300 km deep;
and deep earthquakes, 300 - 700 km deep. In general, the term "deep-#revDefine("focus")
earthquakes" is applied to earthquakes deeper than 70 km. All earthquakes deeper than 70
km are localized within great slabs of shallow #revDefine("lithosphere") that are sinking
into the Earth's #revDefine("mantle").
Distance is measured in
degrees of arc, the common way of measuring distance on a sphere, and kilometers in REV.
The illustration to the left demonstrates the distance in degrees of arc from an
#revDefine("earthquake") to a #revDefine("station"). The station is located at 50 degrees
while the earthquake is at 135 degrees. By subtracting 50 from 135, we get the degree of
the angle created by the distance between the earthquake and station.
- This term is used to describe both sudden slip on a #revDefine("fault"), and the
resulting ground shaking and radiated seismic energy caused by the slip, or by volcanic
or magmatic activity, or other sudden stress changes in the Earth.
A fracture along which the
blocks of crust on either side have moved relative to one another parallel to the
fracture. Strike-slip faults are vertical (or nearly vertical) fractures where the
blocks have mostly moved horizontally. Dip-slip faults are inclined fractures where the
blocks have mostly shifted vertically. Oblique-slip faults have significant components
of both slip styles.
The focus is the point within
the Earth where an #revDefine("earthquake") rupture starts. The epicenter is the point
directly above it at the surface of the Earth. Distance from earthquakes and earthquake
locations are measured from the epicenter.
- GMT stands for Greenwich Mean Time, sometimes called Greenwich Meridian Time
because it is measured from the Greenwich Meridian Line at the Royal Observatory in
Greenwich, England. The current GMT time is . your local time to convert it to GMT
- An angle with reference to, or pertaining to, the center of the Earth. The #revDefine("distance") definition shows
an illustration of a geocentric angle, which is formed by the locations of an #revDefine("earthquake") and a recording #revDefine("station") with reference to
the apex at the center of the Earth.
- The movement of the Earth's surface from #revDefine("earthquakes") or explosions.
Ground motion is produced by waves that are generated by sudden slip on a
#revDefine("fault") or sudden pressure at the explosive source and travel through the Earth
and along its surface.
The outer solid part of the
Earth, including the crust and uppermost #revDefine("mantle"). The lithosphere is about 100
km thick, although its thickness is age dependent (older lithosphere is
The locations of
#revDefine("earthquakes") and stations in REV are indicated by latitude and longitude.
Latitude is measured in degrees starting at the equator, and will be either north or
south depending on whether the earthquake or #revDefine("station") is in the northern or
southern hemisphere. Longitude is measured in degrees starting at the Prime Meridian and
will be either east or west, depending on which hemisphere the earthquake or station is
in. For example, you can see in the illustration to the right an earthquake southeast of
Honshu that is in the eastern and northern hemispheres and is 33.2 degrees from the
equator and 137.0 degrees from the Prime Meridian.
- A number that characterizes the relative size of an #revDefine("earthquake").
Magnitude is based on measurement of the maximum motion recorded by a
#revDefine("seismograph"). Several scales have been defined, but the most commonly used are
(1) local magnitude (ML), commonly referred to as "Richter magnitude," (2) surface-wave
magnitude (Ms), (3) body-wave magnitude (Mb), and (4) moment magnitude (Mw). Scales 1-3
have limited range and applicability and do not satisfactorily measure the size of the
largest earthquakes. The moment magnitude (Mw) scale, based on the concept of seismic
moment, is uniformly applicable to all sizes of earthquakes but is more difficult to
compute than the other types. All magnitude scales should yield approximately the same
value for any given earthquake.
- The part of the Earth's interior between the metallic outer core and the crust. See
#revDefine("lithosphere") for an illustration of the mantle.
- For REV the criteria for notable #revDefine("earthquakes") is a #revDefine("magnitude")
greater than 5.5 for worldwide earthquakes and greater than 3 for earthquakes in the
- Modern #revDefine("seismograph stations") have three separate instruments to record
#revDefine("seismograms") - (1) one to record the north-south waves, (2) another to record
east-west waves, and (3) a vertical one in which a weight resting on a spring tends to
stand still and record vertical #revDefine("ground motions"). This combination of
instruments tells a #revDefine("seismologist") the general direction of the seismic wave
source, the #revDefine("magnitude") at its source, and the character of the wave motion.
The orientation of a seismogram refers to the direction of the waves recorded:
north-south, east-west, or vertical.
- The precise time that an #revDefine("earthquake") rupture occurs. On a #revDefine("seismogram"), the earthquake origin time can be determined by the #revDefine("P wave") arrival.
P (Primary) waves are a type of
body wave. A body wave is a seismic wave that moves through the interior of the Earth,
as opposed to surface waves that travel near the Earth's surface. P and #revDefine("S waves")
are body waves. Each type of wave shakes the ground in different ways. A P wave,
or compressional wave, is a seismic body wave that shakes the ground back and forth in
the same direction and the opposite direction as the direction the wave is moving. P
waves travel faster and are generally felt first. They usually cause very little
- #revDefine("Seismograms") plotted on a graph as a function of #revDefine("distance").
This is a common way #revDefine("seismologists") look at data from an
#revDefine("earthquake"). In REV's record sections, seismograms recorded by
#revDefine("stations") close to the earthquake are plotted to the left and seismograms
recorded by more distant stations are plotted to the right.
An S (Secondary) wave, or shear
wave, is a seismic body wave that shakes the ground back and forth perpendicular to the
direction the wave is moving. It is one of two types of body waves. The other type is
the #revDefine("P wave"). S waves are slower and much more destructive than P
- A record written by a #revDefine("seismograph") in response to #revDefine("ground motions")
produced by an #revDefine("earthquake"), explosion, or other ground-motion sources.
Seismograph or Seismometer
- Seismograph is a term that refers to the seismometer and its recording device as a
single unit. A seismometer is an instrument used to detect and record
#revDefine("earthquakes"). Generally, it consists of a mass attached to a fixed base.
During an earthquake, the base moves and the mass does not. The motion of the base with
respect to the mass is commonly transformed into an electrical voltage. The electrical
voltage is recorded on paper, magnetic tape, or another recording medium. This record is
proportional to the motion of the seismometer mass relative to the earth, but it can be
mathematically converted to a record of the absolute motion of the ground.
- One who studies #revDefine("earthquakes") and the structure of the Earth.
- Refers to the place where a geophysical instrument (#revDefine("seismograph")) is
- An assigned sequence of letters or letters and numbers that are 3 to 5 characters
long, used to identify a particular #revDefine("station"). #revDefine("Station names") can
often be long and this is a way for #revDefine("seismologists") to quickly refer to or
identify stations. The two letters and/or numbers you will see at the start of the
station code in REV indicates the station's network code. For example, the code
"US.NHSC" refers to a station in New Hope, South Carolina in the United States National
Seismic Network. See a list of station codes available in REV.
See a list of network codes available in REV.
- The assigned name for a #revDefine("station"), which usually describes its
A surface wave is a seismic seismic wave that is trapped near the surface of the earth, the opposite of a ("body wave"), which
moves through the interior of the earth.
- The time required for a seismic wave to travel from its source to a recording device or #revDefine("seismometer").
It can be calculated by subtracting the #revDefine("arrival time") from the #revDefine("origin time").
- Zip code refers to the postal code used by the United States* Postal Service. ZIP stands for Zoning
Improvement Plan, suggesting that mail travels faster when senders use it. The basic
format consists of five numbers. ZIP Codes are numbered with the first digit
representing a certain group of U.S. states, the second and third digits together
representing a region in that group (or perhaps a large city), and the fourth and fifth
digits representing more specific areas, such as small towns or regions of that
*Unfortunately, at this time, REV can only support postal codes from the United States.
If you know of a way that we could support international codes, please contact us at
Most definitions on this page provided by the